Caulk the joints and any nail holes paint the panels typically with two coats.
How to remove fake wood siding without damaging.
Cutting the nails will let you remove rotted boards without damaging those your e saving.
You should be able to slide it horizontally and remove it from the channel to expose the nails from the second row down.
Cut through the nails holding the old siding in place.
Dark ugly areas of the siding may need to be gently cleaned before staining then let dry.
The channels around windows and the bottom of the wall secure the edges and bottom row into position.
Use a bleach solution or siding cleaner discussed in a moment.
Paint it sand the panels to remove the polyurethane or clear coat sealer.
Apply primer to the panels.
Reveal the nails anchoring a piece to the wall by sticking the zip tool under the bottom of the piece above it.
So you ll need to cut the nails behind the bottom of the upper piece of good siding to free the damaged piece.
When the nails have been cut the lower board can be pulled out.
Zip tools disconnect a higher piece from a lower piece.
To get at the nails carefully wedge out the bottom of the siding 1 8 to 3 16 in.
Take care not to damage this board as you.
Use a small hacksaw with a sharp blade.
These nails run through the bottom of the board above the damaged one.
To remove a piece at your eye level slide the zip tool under the piece above that one.
Cutting the existing siding.
Stagger the end joints when crosscutting the existing siding so they aren t aligned above each other.
Use a zip tool to disconnect two pieces of siding.
Using an oscillating tool with a metal cutting blade works best for this or use a mini hacksaw with the blade extended beyond the end of the holder.
An oscillating tool with a metal cutting blade is ideal for this job but a simple hacksaw blade will also work.
Cut the nails at the bottom of the row above the boards you re replacing.
Note if the siding doesn t have wood or plywood sheathing behind it crosscut the damaged siding over a stud.